跳到主要內容

小蟻智慧攝影機支援RTSP

來源:http://en.miui.com/thread-196713-1-1.html

小蟻智慧攝影機版本:1.8.5.1l_201511061661(台灣版)
下載檔案
https://drive.google.com/file/d/0ByjBix7wpeJJY0ZWZXlvWl9Za1E/view?usp=sharing

把攝影機SD卡拿讀卡機讀取
把壓縮檔內的test資料夾放進SD根目錄
插回SD卡至攝影機
重開

攝影機會呈現橘燈並執行更新
等恢復至藍燈或是用app確認攝影機開啟

用VLC或相關程式讀取串流
Main stream:rtsp://<CameraIP>:554/ch0_0.h264
Minor stream:rtsp://<CameraIP>:554/ch0_1.h264
Audio stream:rtsp://<CameraIP>:554/ch0_3.h264




Telnet與FTP開啟加上

# Telnet

if [ ! -f "/etc/init.d/S88telnet" ]; then
    echo "#!/bin/sh" > /etc/init.d/S88telnet
    echo "telnetd &" >> /etc/init.d/S88telnet
    chmod 755 /etc/init.d/S88telnet
fi

# FTP

echo "#!/bin/sh" > /etc/init.d/S89ftp
echo "tcpsvd -vE 0.0.0.0 21 ftpd -w / &" >> /etc/init.d/S89ftp
chmod 755 /etc/init.d/S89ftp



User: root
Password: 1234qwer

使用passwd改密碼

參考:http://en.miui.com/thread-224653-1-1.html

留言

張貼留言

這個網誌中的熱門文章

Arduino 滑鼠滾輪編碼器/旋轉編碼器

滑鼠拆下來的滾輪編碼器 時序為                      → CW A  -----------          -------------    HIGH                ----------                  LOW                      ← CCW B  --------          ----------------    HIGH             ----------                     LOW A B 1  1↓CW 1  0 0  0 0  1 1  1 1  0 0  0 0  1↑CCW 程式碼參考底下網址來源修改而來 #define ENCODER_A_PIN 2 #define ENCODER_B_PIN 3 unsigned long time = 0; long position = 0; long num = 0; void setup() { pinMode(ENCODER_A_PIN,INPUT); pinMode(ENCODER_B_PIN,INPUT); attachInterrupt(0, RotaryEncoder, LOW); Serial.begin(9600); time = millis(); } void loop() { while (num != position) { num = position; Serial.println(num); } } void RotaryEncoder(){ int temp =digitalRead(ENCODER_B_PIN); if ((millis() - time) > 3) { if ( temp == LOW) { position++; }else{ if ( temp == HIGH) position--; } } time = millis(); } 沒中斷版本 int trigger=0; void Rotar

V-USB Joystick for Arduino

上次做好沒存檔 這次再翻出來從弄一次...QAQ 花了我一天阿阿阿阿 D+ 接腳2 D-  接腳3 詳情請看usbconfig.h 想改搖桿配置可以用 HID Descriptor Tool 改完記得回usbconfig.h填 USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH 長度 程式碼: https://www.dropbox.com/s/n0rgkb370wto2lv/UsbJOY.rar?dl=0