跳到主要內容

編譯sunxi-tools

mowei@mowei ~/A10/sunxi-tools $ make
gcc -g -O0 -Wall -Wextra -std=c99 -D_POSIX_C_SOURCE=200112L -Iinclude/  -o fexc fexc.c script.c script_uboot.c script_bin.c script_fex.c
ln -s fexc bin2fex
ln -s fexc fex2bin
gcc -g -O0 -Wall -Wextra -std=c99 -D_POSIX_C_SOURCE=200112L -Iinclude/  -o bootinfo bootinfo.c
bootinfo.c: In function ‘print_script’:
bootinfo.c:274:25: warning: unused parameter ‘script’ [-Wunused-parameter]
 void print_script(void *script)
                         ^
gcc -g -O0 -Wall -Wextra -std=c99 -D_POSIX_C_SOURCE=200112L -Iinclude/ `pkg-config --cflags libusb-1.0`  -o fel fel.c  `pkg-config --libs libusb-1.0`
Package libusb-1.0 was not found in the pkg-config search path.
Perhaps you should add the directory containing `libusb-1.0.pc'
to the PKG_CONFIG_PATH environment variable
No package 'libusb-1.0' found
Package libusb-1.0 was not found in the pkg-config search path.
Perhaps you should add the directory containing `libusb-1.0.pc'
to the PKG_CONFIG_PATH environment variable
No package 'libusb-1.0' found
fel.c:22:20: fatal error: libusb.h: No such file or directory
 #include <libusb.h>
                    ^
compilation terminated.
make: *** [fel] Error 1

找不到檔案~
sudo apt-get install libusb-1.0-0-dev

解決~

留言

這個網誌中的熱門文章

小蟻智慧攝影機支援RTSP

來源: http://en.miui.com/thread-196713-1-1.html 小蟻智慧攝影機版本: 1.8.5.1l_201511061661(台灣版) 下載檔案 https://drive.google.com/file/d/0ByjBix7wpeJJY0ZWZXlvWl9Za1E/view?usp=sharing 把攝影機SD卡拿讀卡機讀取 把壓縮檔內的test資料夾放進SD根目錄 插回SD卡至攝影機 重開 攝影機會呈現橘燈並執行更新 等恢復至藍燈或是用app確認攝影機開啟 用VLC或相關程式讀取串流 Main stream:rtsp:// <CameraIP> :554/ch0_0.h264 Minor stream:rtsp:// <CameraIP> :554/ch0_1.h264 Audio stream:rtsp:// <CameraIP> :554/ch0_3.h264 Telnet與FTP開啟加上 # Telnet if [ ! -f "/etc/init.d/S88telnet" ]; then     echo "#!/bin/sh" > /etc/init.d/S88telnet     echo "telnetd &" >> /etc/init.d/S88telnet     chmod 755 /etc/init.d/S88telnet fi # FTP echo "#!/bin/sh" > /etc/init.d/S89ftp echo "tcpsvd -vE 0.0.0.0 21 ftpd -w / &" >> /etc/init.d/S89ftp chmod 755 /etc/init.d/S89ftp User:  root Password:  1234qwer 使用passwd改密碼 參考: http://en.miui.com/thread-224653-1-1.html

Arduino 滑鼠滾輪編碼器/旋轉編碼器

滑鼠拆下來的滾輪編碼器 時序為                      → CW A  -----------          -------------    HIGH                ----------                  LOW                      ← CCW B  --------          ----------------    HIGH             ----------                     LOW A B 1  1↓CW 1  0 0  0 0  1 1  1 1  0 0  0 0  1↑CCW 程式碼參考底下網址來源修改而來 #define ENCODER_A_PIN 2 #define ENCODER_B_PIN 3 unsigned long time = 0; long position = 0; long num = 0; void setup() { pinMode(ENCODER_A_PIN,INPUT); pinMode(ENCODER_B_PIN,INPUT); attachInterrupt(0, RotaryEncoder, LOW); Serial.begin(9600); ti...

V-USB Joystick for Arduino

上次做好沒存檔 這次再翻出來從弄一次...QAQ 花了我一天阿阿阿阿 D+ 接腳2 D-  接腳3 詳情請看usbconfig.h 想改搖桿配置可以用 HID Descriptor Tool 改完記得回usbconfig.h填 USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH 長度 程式碼: https://www.dropbox.com/s/n0rgkb370wto2lv/UsbJOY.rar?dl=0